Thickness: 0.12mm
Peeling mode: cold peeling
Feature: washable, easy cut, no crack
transfer temperature: 130-160 C
transfer time: 10-15 secs
How to Do It
1.Compatible with Craft Cutters, Die Cutters, Sign Plotters, etc.
2.Mirror/Reverse your image design.
3.Place vinyl (gloss side) onto cutting mat .
4.Adjust proper blade speed and cutting pressure .
5.Weed all of the excess slowly, leave the delicate design letters or graphics.
6.Make sure the finished product facing the right way once ironed onto your fabric.
7.Lay out the fabric. Place the t-shirt or fabric on a hard, flat clean dry surface.
8.Set a heat press machine from temperature.
9.Press it only for instructions seconds.
10.Iron on the vinyl gloss side. Do not use steam iron.
11.Disperse the iron's heat evenly. Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image.
12.Wait for the vinyl to COOL and gently peel off backing after few minutes.
